B0065 ad B0066 are left front seat belt pre-tensioner problem codes. Check for loose cables or dirty connections.
How do I fix my air bag service?
To recap, here are 10 simple steps on how to reset the airbag light of your vehicle:
- Turn your ignition on and off.
- Restart your vehicle and do a test drive.
- Examine the passenger airbag switch.
- Inspect whether seat belts are fastened or working correctly.
- Verify that the passenger seat sensor is not applied.
How can I bypass the airbag light?
Zitat von Youtube: Start the truck the airbag light will glow solid at first and then it should go. Away. If you pull the resistor the airbag light should start blinking. Again.
Why does my airbag light keep coming on and off?
If your vehicle—and airbag system—is working properly, the light should remain off. Or, in some vehicles, it may turn on for a few seconds along with all other displays and then immediately dim out. This is normal. If the light persists, however, this is when you should get your airbag system looked at!
How do I get an airbag code?
Zitat von Youtube: Okay so the first thing you're gonna do for an airbag code is you're going to again have the key in the second position there and then you're gonna head over to scan here are this right option.
Can a blown fuse cause the airbag light to come on?
One fuse in particular, fuse #13 is a likely culprit. If your airbag light is on and your rear windshield wiper doesn’t work, then it’s a pretty good indication that you need to change fuse #13 and possibly others. Blown fuses can definitely cause the airbag light to come on.
Can I drive with airbag light on?
When the airbag light illuminates, it means that there is a problem with the system. Most likely, the airbag will not deploy in an accident because of this fault. Therefore, it is not recommended that you drive the vehicle until you have the system repaired.
Can you reset airbag light without tool?
It is impossible in most car models to reset the airbag light without a scanner. This is for safety cautions because you should always repair the fault after the airbag light occurred. Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem.
How much does it cost to turn off the airbag light?
Number 1 — Reset Airbag Light
This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.
Where are the airbag sensors located?
Zitat von Youtube: Here okay check it out right under the fender in the corner. That's phone cash airbag sensor.
How do you test an airbag sensor?
Testing of an airbag sensor is possible, but should not be done. The only way you safely should test an airbag sensor is to use an automotive diagnostic tool to read the airbag control unit’s trouble codes and live data.