Headlights not working in 2006 Mazda6

What would cause both headlights not to work?

Solution: If both headlights aren’t working, it’s unlikely that a bulb is at fault. The likely cause is a fuse, headlight relay, headlight switch, dimmer switch or a wiring fault. About the only cause that is an easy fix is a blown fuse.

Why did my headlights randomly stop working?

Most total headlight failures are caused by a bad component like a fuse, relay, or module. Wiring problems can also cause both headlights to stop working. High beam headlights don’t work or low beams don’t work. The cause: A burned out bulb, or a problem with the high beam switch or relay.

Is there a fuse that controls the headlights?

Headlight Fuse or Relay



This protects all the components on the circuit. If a headlight fuse blows, it could cause the headlights to stop working. Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights.

Why do my brights work but not my headlights?

Headlight Switch is Broken



It may get stuck in position for the high beams or the switch could wear out and simply not turn the headlights on at all. If the switch is bad, replacing it with a new OEM headlight switch is typically the best answer.

How do you diagnose headlight problems?

Headlight Fuse Keeps Blowing Out

  1. Unplug the light, pull the switch, and see if the fuse blows. …
  2. Make sure you have purchased the correct wattage of bulb.
  3. Ensure that you do not have a faulty or damaged bulb.
  4. Check and see if your high beam bulb is the issue. …
  5. Check all wired connections and look for any exposed wiring.


How do I know if my headlight relay is bad?

The most common sign of a bad headlight relay is headlights that don’t work. A headlight relay will typically fail in the open position, preventing voltage from reaching the headlights. If the low beam relay fails, the low beams won’t work.

Where is the fuse located for the headlights?

The front of the dash panel has a fuse panel on it.

How do you check headlight wires?


So make sure you have a clean battery. And then you need to test your baseline. First so your your baseline for some reason on these fluke. Leads. I get about 2.5 to 3 ohms on these leads.

How much does it cost to replace a headlight relay switch?

The average cost of replacing the headlight switch or the dimmer switch is in the range of $150-$250.

Why are my low beams not working?

You’ll need to replace the bulb, switch, or relay. If just one bulb fails to work in either high beam mode or low beam mode, it may be the bulb. Most headlight failures that are limited to just high or low beams are related to a relay or the high beam control switch.

How do you fix a headlight relay?

Part 1 of 1: Replacing the headlight closure relay

  1. Materials Needed.
  2. Step 1: Locate the headlight closure relay. …
  3. Step 2: Remove the fuse box cover or lid. …
  4. Step 3: Remove the old relay. …
  5. Step 4: Insert the new relay. …
  6. Step 5: Test the headlights. …
  7. Step 6: Reattach the fuse box cover.


How can I tell if a relay is bad?

antennamediatorino.eu
Out. Sit it down right there take your other relay. Out. Alright and swap them and then see if the problem goes away with your horn see if it blows if it blows then you probably had a bad relay.

Where is the headlight relay located in a car?

Usually, it is under the hood of the car. The point where your fuse panel is most likely located. On the other hand, it may also be located inside the cab of the car, this would be the case if your car comes with an interior fuse box.

How do you check a headlight switch?

antennamediatorino.eu
Pull our switch out for our parking lights. He's got the peak voltage. And then when we pull it out again for the headlights it's going to drop down.

Why do my low beams not work but my high beams do?

If both of your low-beam headlights are out, but both of the high-beams work fine, it’s possible that both of your low-beam halogen headlight bulbs have simply burned out. After all, the lightbulbs in a modern halogen headlamp unit can burn out just the same as light bulbs in your home or office.