The camshaft(s) is(are) adjusted by the engine computer through the use of an oil control valve(s) (OCV), also called variable valve timing control solenoid valves. When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the engine computer has told it to be.

How do I fix code P0011?

What repairs can fix the P0011 code?

  1. Resetting the fault codes and performing a road test.
  2. Changing the oil and filter to the proper oil viscosity for the engine specifications.
  3. Repairing or replacing the wiring to the camshaft oil control valve for bank 1 intake camshaft.

Can I drive with code P0011?

Driving with a P0011 code in your car is possible, though not advisable. Do not drive with it until you repair it because it can cause severe damage to your car engine components. By ignoring the P0011 error code in your car, the vehicle will emanate several drivability issues.

How much does it cost to fix a P0011 code?

If the problem goes undetected or untreated for too long, sludgy oil can build up in your engine and block the passage to the Oil Control Valves (OCV). Unfortunately, if that happens, you’ll probably need to replace your engine, which will likely cost somewhere around $3000 to $4000.

How do I fix the timing on my camshaft position?

Zitat von Youtube: Use a valve cleaner to clean the camshaft oil control valve. Then use a multimeter to proceed a test on the camshaft.

Is code P0011 serious?

What Does Code P0011 Mean? Repair Urgency: Fix this code immediately (same-day if possible) to avoid damage to multiple internal engine components. Diagnosis: This trouble code severely impacts the drivability of your vehicle.

Is P0011 serious?

Fault code P0011 is specific to vehicles that utilize variable valve timing in a bid to increase engine operating efficiency. Engines featuring variable valve timing make subtle timing adjustments on the fly, which effectively vary the point at which each cylinder’s intake/exhaust valves actuate.

Can low oil cause P0011 code?

Can Low Oil Cause P0011? A Sludge buildup can cause a P0011 trouble code Sludge is caused by running the engine at low oil levels, neglecting oil changes, or going too far on an oil change, or using a bad quality oil. The oil should be changed, the code should be cleared, and the vehicle should be driven.

Can low oil pressure cause P0011?

One of the common causes of P0011 Code is low engine oil level. Although P0011 sounds a bit complicated, it can easily be triggered by a low oil level. So, the fix isn’t always an extensive engine repair.