P0060 FORD code

P0060 indicates that there is a malfunction in the oxygen sensor located after the catalytic convertor. The oxygen sensor is used to regulate the performance of the engine, such as fuel consumption. However the O2 sensor can only accurately regulate the engine performance after the sensor has reached a hot temperature.

How do I fix error code P0060?

Zitat von Youtube: Visually check the heated oxygen sensors electrical connections wire harness and metal tabs for any. Damages.

What O2 sensor is bank 2 sensor 2?

Diagnostic Trouble Code (DTC) P0158 stands for O2 Sensor Circuit High Voltage (Bank 2, Sensor 2). The O2 sensor 2 is the downstream O2 sensor and it measures the amount of oxygen in the exhaust gases leaving the catalytic converter (cat).

How do I fix code P0155?

What repairs can fix the P0155 code?

  1. Fix broken wires or bare wires.
  2. Replace the coolant temperature sensor.
  3. Replace the oxygen sensor.
  4. Replace the power control module (PCM), in the rare case that it is necessary.


What does po157 mean?

Diagnostic trouble code (DTC) P0157 stands for “Oxygen Sensor Circuit Low Voltage (Bank 2, Sensor 2).” It indicates that the voltage signal from the downstream oxygen sensor has remained below a specific threshold for an extended period.

What is HO2S heater resistance?

The mechanic can then start by checking the resistance across the wires of the HO2S, which should be about 8 ohms with a range of 7-9 ohms. If the resistance is outside of the acceptable range, then the sensor is bad and must be replaced.

What can cause a P0175 code?

P0175 Causes

  • Faulty or dirty mass airflow sensor.
  • Vacuum leaks – PCV hoses, vacuum hoses, intake manifold gasket.
  • Weak fuel pump.
  • Clogged or dirty fuel injectors.
  • Clogged fuel filter.
  • Exhaust leak.
  • Faulty oxygen sensor.
  • Faulty air-fuel ratio sensor.


Is Bank 2 front or rear?

Most commonly, bank 1 houses the front most cylinder on the engine cylinder 1, and bank 2 is the opposite side of the engine. Check out the pics below to see several different configurations.

How do you know which O2 sensor is bad?

Zitat von Youtube: You can know for sure which of your o2 sensors is indicating a problem by having your code scanned. You can have your code scan for free at your local O'Reilly Auto Parts Store.