P0087 FORD code

When your vehicle’s Engine Control M (ECM) records a code of P0087, it means the fuel pressure in the system is below specification. Symptoms of a P0087 diagnostic trouble code may include a misfire because of a lean fuel condition, and the vehicle might run rough or lack power on acceleration.

How do you fix code P0087?

What repairs can fix the P0087 code?

  1. Replacing the fuel filter or screen.
  2. Replacing kinked fuel lines.
  3. Removing and replacing the fuel pump.
  4. Replacing a faulty fuel pressure sensor.


What causes a P0087?

The error code P0087 is triggered when the PCM (Powertrain Control Module) detects low fuel pressure in its fuel pressure sensor. This problem is normally caused by the fuel pump, fuel supply pipe blockage, fuel pressure regulator, or a mechanical fault.

What causes low fuel rail pressure?

Three of the most common causes of heavy equipment low fuel pressure are a faulty regulator, a fuel pump malfunction or problems with the fuel lines.

What happens if fuel pressure is too low?

Decreased Fuel Pressure



Low fuel pressure can lead to engine misfires, low acceleration, rough idles, and engine stalls. If your check engine light is on and your car has been stalling out, you may have a fuel pump failure.

Where is the fuel rail pressure sensor located?

A fuel rail pressure sensor (commonly known as a fuel pressure sensor) is used in many diesel and some gasoline engines. This sensor is usually located near the middle of the fuel rail and is linked to the engine control unit (ECU), which is the central computer of a vehicle.

Can a fuel filter cause low fuel rail pressure?

Clogged Fuel Filter



The fuel filter cleans the fuel entering the engine. The fuel filter should be replaced within special intervals, and if you have not changed it for a long time – it might be a clogged fuel filter causing low fuel pressure.

What are signs of a failing fuel pump?

Seven Signs Your Fuel Pump Is Going Out

  • Sputtering Engine. Your fuel pump is telling you something if your engine starts to sputter once you’ve hit the top speed on the highway. …
  • Overheating Engine. …
  • Low Fuel Pressure. …
  • Power Loss. …
  • Surging Engine. …
  • Gas Mileage Decrease. …
  • Dead Engine.


What are signs that your fuel pump is going out?

Is My Fuel Pump Going Bad? Here Are 8 Signs It Is!

  • Fuel Tank Noise. A damaged fuel pump might make a loud, whining sound that you’ll hear from your gas tank. …
  • Difficult Starts. …
  • Sputtering Engine. …
  • The Actual Stall. …
  • Power Loss. …
  • Surging Power. …
  • Lower Fuel Efficiency. …
  • Dead Engine.


How do you test a fuel rail pressure sensor?

Step by Step Guide on How to Test a Pressure Sensor With a Sensor

  1. Disconnect the Fuel Pressure Sensor. …
  2. Turn on Your Car’s Engine. …
  3. Check for the Voltage of the Harness’ Connections. …
  4. Compare the Values of Voltage of the Harness’ Connections Against What’s Written in Your Car’s Manual. …
  5. Check the Wirings on Your Car.

How do you check a fuel pressure regulator?


Zitat von Youtube: Using the vacuum gauge you canister applying vacuum to the few pressure regulator. You notice us as the vacuum increases. The pressure drops on the gauge. If the vacuum drops. The pressure increases.