Diagnostic trouble code (DTC) P013C stands for “O2 Sensor Slow Response – Rich to Lean (Bank 2 Sensor 2).” It is set when the powertrain control module (PCM) detects that the bank 2 downstream oxygen (O2) sensor is taking longer than expected to switch from rich (a higher output voltage) to lean (a lower output voltage …
How do I fix P013C code?
Zitat von Youtube: Visually check the oxygen sensors electrical connections wire harness and metal tabs for any damages. If the damages are found then replace the oxygen. Sensor.
What causes P013C code?
The engine control module (PCM) is constantly adjusting the amount of fuel delivered to the engine based off of the oxygen sensor’s signal. If the PCM does not see the Oxygen sensor reading constantly changing with the fuel adjustment, it will set code P013C.
What O2 sensor is bank 2 sensor 2?
Diagnostic Trouble Code (DTC) P0158 stands for O2 Sensor Circuit High Voltage (Bank 2, Sensor 2). The O2 sensor 2 is the downstream O2 sensor and it measures the amount of oxygen in the exhaust gases leaving the catalytic converter (cat).
What does code P013E mean?
What Does the P013E Code Mean? Diagnostic trouble code (DTC) P013E stands for “O2 Sensor Delayed Response – Rich to Lean (Bank 1, Sensor 2). It is logged when the powertrain control module (PCM) perceives a delay in response from the downstream oxygen (O2) sensor located in bank 1.
What does P0430 code mean?
Code P0430 indicates that the catalytic converter is not functioning efficiently, therefore increasing the output of harmful pollutants by the vehicle.
What is code P2273?
P2273 code definition
The P2273 diagnostic trouble code is an indication that the Bank 2 Sensor 2 oxygen (O2) sensor signal is stuck on rich.
How is po420 code diagnosis?
The most common reason for check engine code P0420 is catalytic converter failure, but there are other potential causes for this code. It’s important to look for other codes that could indicate the root cause of converter failure, such as misfires or an incorrect air-fuel ratio. What is this?
What is code P0057 mean?
The P0057 code is set when the ECM detects that the HO2S2 on bank 2 has a malfunctioning heater element. The heater in the oxygen sensor helps get the sensor up to operating temperature faster in order to improve fuel economy and emissions.
Are bank 1 and bank 2 O2 sensors the same?
Bank 2 Sensor 1 is the first sensor closest to the engine. On Bank 2 means it is at the engine side with cylinders 2, 4, 6, 8, etc. Bank 2 Sensor 2 is the second sensor on the engine’s exhaust pipe, usually behind the catalytic converter.