P0183 is a generic OBD-II code indicating that the fuel temperature sensor A circuit voltage went above calibrated limit specifications during the self test.
What causes P0183 code?
The P0183 fault code can be defined as fuel temperature sensor A circuit high input. It is a generic code which would indicate that the fuel temperature sensor A circuit voltage has gone above calibrated limit specifications during the self test.
Where is the fuel temperature sensor located?
Right Engine Fuel Temperature Sensor. The right engine fuel temperature sensor is located in the right engine fuel cooled oil cooler. Plug FTMP is connected to the sensor. Open the right engine lower cowling to access the sensor.
What are the symptoms of a faulty fuel temperature sensor?
BAD FUEL TEMPERATURE SENSOR SYMPTOMS
- YOU SENSE POOR FUEL ECONOMY.
- YOU READ IRREGULAR TEMPERATURE READINGS.
- YOU OBSERVE BLACK SMOKE COMING OFF THE EXHAUST.
- THE ENGINE STARTS TO OVERHEAT.
- THE CHECK ENGINE LIGHT TURNS ON.
How do you change a fuel temperature sensor?
Zitat von Youtube: Part out of the way we'll have more room let's remove the safety clip on that fuel line three quarters deep socket to remove the sensor. Let's take that volume out let's put a rag.
How do I fix code P0183?
What repairs can fix the P0183 code?
- Replacing the fuel temperature sensor if it tests out of specifications.
- Repairing or replacing a defective connector or wiring to the sensor.
- Replacing a defective ECM.
- Replacing the diesel fuel heater assembly with the temperature sensor.
What does fuel temperature sensor A circuit high mean?
The Diagnostic Trouble Code (DTC) P0183 indicates “Fuel Temperature Sensor “A” Circuit High.” The fuel temperature sensor measures the fuel’s temperature and transmits the appropriate signal to the PCM. Higher signals correlate to colder temperatures and higher fuel densities.
How much does it cost to replace a fuel temperature sensor?
Fuel Temperature Sensor Replacement Cost – RepairPal Estimate. The average cost for fuel temperature sensor replacement is between $231 and $273. Labor costs are estimated between $159 and $201 while parts are priced at $72.
Can a temperature sensor cause a car not to start?
The sensor will not cause a no start. It could cause a hard start and a rich or lean condition only.
What sensors affect fuel delivery to the engine?
The idle air sensor, coolant temperature sensor and EGR sensor all change things within the engine and fuel delivery system. You may notice that some sensors are listed in both categories – that is because in some vehicles they have two purposes.
What is the use of a fuel temperature sensor?
Thermometrics Fuel Temperature Sensor (FTS) is designed to measure the temperature of a vehicle’s fuel and relay this information to the engine control unit, so that it can optimize the air-to-fuel mix ratio, depending on what the fuel temperature is with respect to the intake air temperature.
Where is coolant temperature sensor?
In most cars, the primary ECT sensor (ECT sensor 1) is installed near the thermostat in the cylinder head or block or on the thermostat housing. A second coolant temperature sensor could be installed in another part of the engine, or in the radiator.