Code P0306 is triggered when the crankshaft sensor does not get an acceleration of the crankshaft from cylinder number 6 firing properly indicating the cylinder is not contributing to the engine power.
How do I fix error code P0306?
Zitat von Youtube: If the ignition coil is covered with engine oil or stains. Simply clean it with a wd-40 cleaner otherwise replace the damaged ignition coil with a new one.
What can cause a misfire on cylinder 6?
Low Compression – Low compression in the cylinder due to defective valves or rings may cause a misfire. Clogged, Dirty or Damaged Fuel Injector – Insufficient fuel in the cylinder can cause a misfire. A faulty fuel injector causes low pressure affecting the cylinders.
How much does it cost to fix a cylinder 6 misfire?
The Cylinder 6 misfire can be anything from a bad spark plug, or coil pack. The most expensive of these would be the coil pack (ignition coil) and that would cost you around $100.
Can I drive with a cylinder 6 misfire?
An engine misfire can be caused by bad spark plugs or imbalanced air/fuel mixture. Driving with a misfire isn’t safe and can damage your engine.
How do I fix cylinder 6 misfire?
What repairs can fix the P0306 code?
- Replace the faulty spark plug or replace all spark plugs as a set if failure was due to a worn out plug.
- Replace the leaking valve cover gasket then replace the failed coil, plug wires, and plugs.
- Replace the ECM for a bad circuit that powers the fuel injector or coil for number 6.
What can cause a misfire in a cylinder?
What Causes A 4 Cylinder Misfire?
- A damaged fuel injector.
- Sticking valves.
- Faulty spark plugs.
- Worn coil packs.
- Defective injector circuit.
- Bad catalytic converter.
- Low fuel pressure.
- Leaking head gasket.
Will changing spark plugs fix misfiring?
If your engine is misfiring, you may be able to fix the problem easily by replacing your spark plugs. Spark plugs are relatively easy to remove from engines and inspect for damage, and at less than $25 a piece, they are relatively cheap to replace, too.
How much does a misfiring cylinder cost to fix?
How Much Does It Cost to Fix a Cylinder 4 Misfire?
|Diagnosis||Average DIY Repair Cost||Average Professional Repair Cost|
|Spark plug replacement||$20-$100||$40-$150|
|Ignition coil replacement||$50-$80||$100-$200|
|Distributor or wire replacement||$40-$60||$90-$125|
How serious is a cylinder misfire?
If left untreated, a cylinder misfire can lead to significant engine damage. Worse, if you experience a bad misfire while driving, it could result in an accident. This is why it’s important to treat engine misfires as soon as you detect them.