A P0703 code means the PCM has registered a fault in the brake switch B circuit. This is the dedicated stop lamp circuit, which also deactivates the cruise control system and transmission torque converter lockup system, as well as the stop lamps.

How do I fix code P0703?

What Repairs Will Fix P0703?

  1. Replace or adjust the brake lamp switch.
  2. Replace brake light fuse.
  3. Replace fusible link.
  4. Replace brake light bulb(s)
  5. Replace brake light socket(s)
  6. Replace or repair shorted wiring or connectors.
  7. Reflash PCM/ECM.

What is a P0703 code?

OBD-II Code P0703 is defined as a Brake Switch “B” Circuit. The Brake Switch tells the engine control module (PCM) that the brake pedal is depressed. This switch also controls the brake lights. If the PCM detects an implausible signal from the Brake Switch, the PCM will set code P0703.

What is a brake switch B circuit?

The brake switch B circuit allows the cruise control system to be disengaged by tapping the brake pedal, as well as ensuring that the torque converter lock-up system disengages when coming to a stop.

What happens when brake light switch fails?

If your brake switch malfunctions, the rear brake lights won’t illuminate, and the driver behind you won’t know that you’re slowing down, causing a major safety hazard. Now, this could indicate that a brake light bulb in the rear has burnt out or that you’ve got a defective brake light switch.

What is a torque converter brake switch?

The brake switch B circuit is part of the torque converter clutch system. This indicates the status of the brake pedal, and works as part of the system that deactivates the torque converter lock-up and cruise control.

What is code P1000?

This error code essentially means that your car’s ECC has not completed its emission systems test. The computer on your vehicle must complete several self-tests known as Readiness Monitors. The display of a P1000 code means that this testing has not been finalized.

What does Engine code P0730 mean?

Code P0730 means that the Powertrain Computer or PCM is seeing greater than a specified RPM difference between the rotational speed of the Input RPM Sensor and the Transmission Output RPM Sensor. This can occur during shifting or when driving at steady speeds in the same gear.