P0807 CHRYSLER code

The P0807 code appears in vehicles using manual transmissions and indicates that the powertrain control module (PCM) has found a malfunction in the clutch position sensor circuit. It can appear in automatic vehicles, meaning there is a PCM error.

How do I fix code P0807?

Replace/Repair These Parts To Fix OBD Code P0807

Clutch Start Switch – As a very rare case, a broken clutch start switch can help the P0807 error code to be stored. Change the faulty component as soon as possible. Engine Wires – Check the engine wires, if they are damaged or cut.

Where is the clutch position sensor?

On most applications, the clutch position sensor is located directly on, or near the clutch pedal to allow the clutch pedal itself to act on the switch when the pedal is depressed.

How do I know if my clutch switch is bad?

One of the biggest signs your clutch switch has failed is the vehicle will not turn on when you have the key in the ignition, and try to start your vehicle. Even if the clutch is pressed all the way to the floor, the vehicle is in park, and your car still will not turn on, it could be a faulty clutch switch.

How do you check a clutch switch?

The clutch switch and circuit can be detected with a multimeter. Remove the switch’s plug and use the meter to measure battery voltage. To measure the ohms, set the meter and check the switch. If the switch is open and the pedal is not depressed, the meter should show an infinite number.

What does a clutch position sensor do?

The purpose of the Clutch Position Sensor is to interact with a magnet fixed to the master cylinder piston to indicate the position of the clutch pedal. The clutch position sensor is used to detect clutch engagement.

Will a bad clutch throw a code?

A failed clutch pedal position sensor can throw a code, but I don’t see why it would cause the issues you’re having. From what I can remember off-hand, the CPP sensor will only affect minor things like switching between open- and closed-loop idle, which is completely transparent to the driver on a properly-tuned Focus.

How do you override a clutch switch?

Zitat von Youtube: And then the other one would be the safety switch so the up the upper one as long as the buttons not touching.