P0876 is a diagnostic trouble code (DTC) for “Transmission Fluid Pressure Sensor/Switch D Circuit Range/Performance“. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
How do you fix P0876 code?
What Repairs Will Fix P0876?
- Change the transmission fluid and filter.
- Repair transmission fluid leaks.
- Repair or replace damaged wiring and sensors on the transmission wiring harness.
- Replace the transmission pump.
- Replace transmission fluid pressure sensor.
- Replace transmission fluid temperature sensor.
Where is the transmission fluid pressure sensor?
The Transmission Fluid Pressure Sensor/Switch (TFPS) is usually found attached to the side of the valve body inside the transmission, although sometimes it may be found screwed into the side of the transmission case/body itself.
What does transmission fluid pressure low mean?
If the fluid is low, it should be assumed that there is a leak in the system, and the mechanic should begin searching for where the leak is coming from. Depending on the location of the leak, it may be able to be repaired, and the issue resolved.
What does code P084B mean?
The trouble code P084B can be defined as Transmission Fluid Pressure Sensor/Switch “H” Circuit Range/Performance. The mechanical transmission pressures are converted by the TFPS into an electrical signal for the powertrain control module or transmission control module.
What does P0731 code mean?
The P0731 code occurs when the PCM detects a discrepancy between the speeds of first gear’s input RPM sensor and transmission output RPM sensor. As a result, the vehicle cannot shift into first gear, and it could indicate that the transmission is slipping.
How do I fix code P0733?
Repairs that can fix a P0733 code would include:
- Replacing a shift solenoid.
- Replacing the powertrain control module.
- Replacing the transmission module (if applicable)
- Adding or replacing the transmission fluid and filter.
- Overhauling the current transmission.
- Installing a brand new transmission.
How much does it cost to replace a transmission fluid pressure sensor?
Replacing your transmission oil pressure switch can cost anywhere between $170 and $300, depending on the make and model of your vehicle, the cost of parts and the cost of labor.
How do you fix low transmission fluid pressure?
What Repairs Will Fix P0868?
- Change the transmission fluid and filter.
- Repair transmission fluid leaks.
- Repair or replace damaged wiring and sensors on the transmission wiring harness.
- Replace the transmission pump.
- Replace transmission fluid pressure sensor.
- Replace transmission fluid temperature sensor.
How do you check a transmission pressure switch?
In order to test the switch you can connect your multimeter between the pin and the senders body. You should find the switch is closed while the engine is at rest. When the engine is running, the switch should open. As you can see this switch has only one pin, so the switch works between ground and the pin.
What are the symptoms of low transmission fluid?
In the meantime, it’s a good idea to familiarize yourself with the tell-tale signs that you may be low on transmission fluid.
- Noises. …
- Burning Smell. …
- Transmission Leaks. …
- Slipping Gears. …
- Slow Gear Engagement. …
- Vehicle Accelerates Poorly. …
- Check Engine or Transmission Warning Light Is On.
What are the signs that your transmission is going out?
What Are the Transmission Failure Symptoms?
- Refusal to Switch Gears. If your vehicle refuses or struggles to change gears, you are more than likely facing a problem with your transmission system. …
- Burning Smell. …
- Noises When in Neutral. …
- Slipping Gears. …
- Dragging Clutch. …
- Leaking Fluid. …
- Check Engine Light. …
- Grinding or Shaking.