P2183 FORD code

P2183 is a diagnostic trouble code (DTC) for “Engine Coolant Temperature Sensor 2 Circuit Range/Performance“. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.

How do I fix error code P2183?

Zitat von Youtube: In most cars the thermostat is placed near the water pump on the cylinder. Head first carefully remove the thermostat from the engine the engine has to be cool before attempting the process.

What is ECT sensor 2?

The ECT sensor is a thermistor that’s responsible for measuring the temperature of the coolant going through the engine. It’s typically located in a coolant passage in the cylinder head. This sensor’s resistance is high when the coolant temperature is low and its resistance is low when the coolant temperature is high.

What causes po117 code?

P0117 code indicates that the vehicle’s powertrain control module or PCM has detected a low voltage input from the engine coolant temperature (ECT) sensor 1. Once the PCM detects a signal voltage that’s lower than the normal operating range of the sensor, the OBD code P0117 registers in your vehicle’s memory.

What does ECT sensor do?

A coolant temperature sensor (CTS) (also known as an ECT sensor or ECTS (engine coolant temperature sensor) is used to measure the temperature of the coolant/antifreeze mix in the cooling system, giving an indication of how much heat the engine is giving off.

How is P0128 diagnosed?

The most common cause for P0128 is the engine coolant thermostat is stuck open. A simple way to diagnose this is to feel the radiator hose and monitor how hot the temperature of the coolant is when it starts flowing through the radiator hose.

What is po111 code?

What Does the P0111 Code Mean? Diagnostic trouble code (DTC) P0111 stands for “Intake Air Temperature Sensor 1 Circuit Range/Performance (Bank 1).” This error code is logged when the powertrain control module (PCM) perceives the signal from the intake air temperature (IAT) sensor to be outside factory specifications.

How do I fix code P0118?

What repairs can fix the P0118 code?

  1. Repairing or replacing the ECT connector.
  2. Repairing or replacing the wiring open circuit as necessary.
  3. Replacing the ECT with a new sensor.

Where is coolant temperature sensor?

In most cars, the primary ECT sensor (ECT sensor 1) is installed near the thermostat in the cylinder head or block or on the thermostat housing. A second coolant temperature sensor could be installed in another part of the engine, or in the radiator.

How do I fix code P2185?

What repairs can fix the P2185 code?

  1. A new ECT sensor.
  2. ECT connector or harness.
  3. Cooling system leak repair and fill.
  4. Thermostat replacement.

Can I drive with P0117?

Diagnosis: This trouble code will put your vehicle into a failsafe mode, which may cause your car’s engine to hesitate and run rough. Other characteristics of the failsafe mode may include lowered fuel economy, increased emissions, and other driving inconveniences.

Can low coolant cause P0117?

The Engine Coolant Temperature Sensor converts the coolant temperature into a voltage that is high when the engine is cold and low as the engine warms up. Code P0117 indicates a low voltage input from the Coolant Temperature Circuit to the PCM.