How do I choose the right transmission fluid?
The easiest way to make sure you’re using the right type of ATF is to check the owner’s manual. It’ll tell you exactly which ATF the manufacturer recommended for your car. You may also find a recommendation on the dipstick. Either is a reasonable resource for determining the right type of fluid for your transmission.
What kind of automatic transmission fluid do I need?
What Transmission Fluid Do I Need?
| Car Make | Transmission Fluid Type |
|---|---|
| Ford Mercury Lincoln | Mercon V |
| Ford (DuratecHE) MAZDA (Europe / Asia) | Mercon LV |
| GM Toyota (pre-2004) | Dexron VI |
| All Honda (except CVT) Acura (except CVT) | ATF DW-1 |
Can I use dexron III instead of dexron VI?
DEXRON-VI can be used in any proportion in past model vehicles equipped with an automatic transmission, in place of DEXRON-III (for instance, topping off the fluid in the event of a repair or fluid change). DEXRON-VI is also compatible with any former version of DEXRON for use in automatic transmissions.
Can I use dexron 3 instead of ATF 4?
Fina’s product data sheet for its “Dexron-III/Mercon ATF” says it is recommended for “all late model GM…Chrysler and most imported car…automatic transmissions, as well as, (sic) those in Ford vehicles that call for a Mercon fluid.” But, again, a fluid compatible with Dexron III or Mercon is not going to be …
What happens if you use the wrong transmission fluid?
Automatic transmissions must only use the fluid specified by the automaker, such as General Motors’ Dexron series or Toyota’s Type T. Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission.
Is Synthetic transmission fluid better?
With their improved resistance to the heat and cold, as well as sheer and oxidation, many manufacturers have already discontinued organic-based compounds in favor of synthetics. Synthetic automatic transmission fluids also tend to last longer, making them the overall recommended choice.
What’s the difference between Dexron 2 and dexron 3 transmission fluid?
The improvements in Dexron-III(F) include better friction stability, more high-temperature oxidation stability, and better material compatibility. Dexron-III(F) has the same low-temperature fluidity as Dexron-II(E), for better transmission performance in cold weather.
What is Dexron III?
ACDelco DEXRON® III (H) is a premium quality automatic transmission fluid intended for use as service-fill for automatic transmissions and vehicle components that use automatic transmission fluid as a lubricant or hydraulic fluid, such as transfer cases, manual transmissions and power steering systems.
Do all cars take the same transmission fluid?
Yes, even a manual needs transmission fluid. The type of fluid can vary from car to car, however. Some manuals require conventional engine oil, and others function best with automatic transmission fluid. So make sure you’re putting in the fluid that’s specified for your car.
What color is ATF+4?
Property
| Property | |
|---|---|
| Color, Visual | Red |
| Flash Point, Cleveland Open Cup, °C, ASTM D92 | 200 ( 392) |
| Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 7.5 |
| Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 | 34.4 |
Is Dex Merc the same as Dexron VI?
Dex/Merc would be fine. Dexron VI is listed by GM as backward compatible, but is thinner than original Dexron III. I’d use the Dex/Merc myself.
What is the difference between Dexron 3 and Dexron 6?
Dexron VI is a lot more stable at higher temperatures and lasts longer. It can also be used to top off dexron 3, however, you can’t use dexron 3 if you already have dexron 6 originally in your trans, or if it has been flushed with dexron 6.
What happens if you mix dexron 3 with dexron 6?
Dex 6 is fine to mix with Dex 3. Just do filter and replaced drained fluid.
Is dexron 3 fully synthetic?
Transmission Fluid – Synthetic Oil Type – GM DEXRON III Manufacturers Recommended Fluid – Free Shipping on Orders Over $99 at Summit Racing.
Is dexron vi full synthetic?
DEXRON VI/MERCON LV (ATF) Full Synthetic Automatic Transmission Fluid. Valvoline Dexron VI/Mercon LV ATF is the full-synthetic automatic transmission fluid that has been uniquely engineered to meet and exceed the requirements of the General Motors Dexron VI specification and is officially licensed and approved by GM.
What cars use dexron VI?
CAM2 DEXRON®-VI Multi-Vehicle Full Synthetic ATF is recommended for use in: GM DEXRON®-VI, DEXRON® III/III(H)/IIE, DEXRON® II, Ford MERCON® LV, SP, V, Hyundai/Kia SP-II/III/IV, Toyota WS, T-III, T-IV Mercedes Benz®, Honda® Z-1, Allison®, and Nissan® Matic Fluids.
What does dexron VI mean?
Mobil DEXRON-VI ATF is a high performance, synthetic blend formulation that meets or exceeds the stringent requirements of GM’s DEXRON-VI specification and provides warranty protection for 2006 and newer GM vehicles. It also provides improved performance in older GM vehicles, wherever DEXRON is specified.