What transfer case goes with 4L60E?
NP246 Transfer Case- NP8 Fits 98-02 with 4L60E (27 spline)- Bulldog Tough OEM Quality Replacement Unit From The Gear Shop.
What years are interchangeable for 4L60E?
The key distinction of the Later 4L60-E (1996-2010) from the Early 4L60-E (1992-1997), 4L60 (1990-1992), or 700R4 (1982-1989) is the six-bolt “hex” rear output or tailhousing / adapter pattern. The previous versions featured a four-bolt square bolt pattern at the adapter or tailhousing.
Will a 350 bolt up to a 4L60E?
Will A 350 Engine Work With A 4l60e? A premium member gets access to exclusive benefits. You will be able to bolt straight up to your 350 with the 4L60E.
Does 4L60E have overdrive?
See all 19 photos This could well be the ultimate overdrive automatic transmission for a street rod-a 4L60E from Gear Star. An HGM standalone computer controls the shift points rather than the throttle valve cable found on other transmissions.
How much HP can a 4L60E handle?
Their Stage 2 Pro Race transmission can handle gobs of power while their Invincible Black Edition 4L60E trans can support over 1,000 ponies.
Is there a difference between 2WD and 4WD 4L60E?
The main difference between a 2WD transmission vs a 4WD transmission is the output shaft. The Output shaft of a 4WD is shorter than a 2WD version. The 4WD transmission is also designed to mate up with a transfer case to engage 4WD and Lo-range (4L).
Can you run a 4L60E without a computer?
Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. On “E” transmissions, the computer controls everything: TCC lockup, gear changes, shift quality and firmness, and line pressure.
Which is better 4L60E or 700R4?
700R4: The Good And The Bad. Shifting over to the 4L60E side, the main advantage of this transmission is that electronics eliminate the need for a TV cable and that whirling dervish of weights and springs to establish shift control.
What is the difference between 4L60 and 4L60E?
The 4L60E is very similar to the 4L60 in almost every way, including having a 4-gear automatic shift transmission. Also, both 4L60 and 4L60E feature gears positioned or placed longitudinally (in a north-south direction). However, the 4L60E can handle a GVWR of 8,600 lb, which is more than 4L60’s.
How can I make my 4L60E stronger?
4L60E Mods for Performance Enthusiasts
- Lay out the important parts on an assembly bench. …
- Rebuild with an improved, thicker sun shell. …
- Use five-pinion front/rear planetary. …
- Use a larger clutch with an input drum reinforcement sleeve. …
- Stamped Steel forward clutch apply pistons.
What transmission is better 4L60E or 4L80E?
The Bottom Line. The 4L60E vs 4L80E performance transmission differences are numerous. And these differences show that the 4L80E is the better transmission of the duo. However, it’ll cost you more to acquire this unit compared to the 4L60E and the latter is also easier to find.
What do I need to swap a 4L60E to a 4L80E?
In almost every case, you will need to build (or buy) a new transmission crossmember, a new torque converter, a set of transmission lines, a modified or swap harness, and a modified driveshaft with a larger yoke and crossover U-joint.
How much does it cost to swap a 4L60E to a 4L80E?
The total price of this particular swap was a hair under $4,200. This included the complete transmission with torque converter (about $2,300), all of the conversion components, front driveshaft, and labor.
Can I run a 4L80E without a computer?
However, the 4L80E can be easily converted to a manually shifted valvebody, which eliminates the need for the computer and much of the electronics and wiring. This conversion turns the 4L80E into a great heavy-duty analog overdrive transmission that can be easily swapped into almost any high-horsepower 4×4.