Wire hanging loose on B&S small engine – is that normal?


Why are overhead cables hang loosely?

During transmission of electricity, heat is being dissipated. The heat generated by cables is being minimized via high voltage transmission. The effect of weather and the internal temperature of the cable make it necessary to let the cables a little bit loose.

Why do the wires between the pile on H hang?

This is to minimize the tension in the wires.

Why telephone and electric wires are always kept loose between utility poles?

Answer:Electric wires are kept loose to prevent them from snapping in winter.

Why are power lines so loose?

The lines are often heavily loaded because of increased power consumption, and the conductors, which are generally made of copper or aluminum, expand when heated. That expansion increases the slack between transmission line structures, causing them to sag.

Why the electric wire that is connecting in the post outside a little bit saggy and not tightly tied?

The reason is to minimize the tension in the wire. The wires expand when exposed to intense heat from sun and contract during cold weather. Stretching the wire and connecting to the poles will make the wires loosen up and tear easily.

How do lineman not get electrocuted?

A live line worker is electrically protected by insulating gloves and other insulating equipment, and carries out the work in direct mechanical contact with live parts. The barehanded approach has a live line worker performing the work in direct electric contact with live parts.

Why do squirrels not get electrocuted on power lines?

Electrical Conductors

When squirrels walk on power lines, electricity would not travel from one end of the wire to the other faster by traveling through the squirrel, so the electricity and squirrel both continue on their paths.

Why do birds sit on power lines before storms?

As the temperature drops, birds like to conserve their body temperature by sitting together, quite often for long periods of time. Because power lines are slightly warmer, these make an ideal perching place for birds to just sit and conserve their energy.

Do power lines sag more in summer than winter?

A line sags more in hot weather and less in cold weather. The reason for this is because conductors expand in hot weather; in other words the length of the conductor increases as the temperature increases.

Who is responsible for cable line from pole to house?

The customer/owner is responsible for installing, maintaining and repairing all equipment beyond theservice connection point except for the electric meter. If you receive overhead electric service, your electric system con- sists of the following: 1.

What can I do about low hanging power lines?

Any time you have a safety concern about sagging or downed lines, it is best to contact the utility company or call 9-1-1. When calling or writing the utility company who is responsible for the low hanging power lines, make notes of every phone contact, and keep copies of all written communications.

Who is responsible for my electricity cables?

The customer/owner is responsible for installing, maintaining and repairing all equipment beyond theservice connection point except for the electric meter. If you receive overhead electric service, your electric system con- sists of the following: 1. Electric Lines that run from the utility pole to your residence.

Can you touch a residential power line?

Misconception #2: Power lines are insulated, so they’re safe to touch. This is a common misconception that many people have about power lines. Power lines are not insulated and you should always avoid contact with them. It is quite possible for people to get electrocuted if you touch power lines.

Why do electrical wires sag in the summer and hang tight in the winter?

Electrical wires stretch and sag during summer, because it expands on heating. Electrical wires stretch and sag during summer, because it expands on heating.

Why do electric power lines sag during summer days?

The lines are often heavily loaded because of increased power consumption, and the conductors – which are generally made of copper or aluminum – expand when heated. That expansion increases the slack between transmission line structures, causing the lines to sag.

What happens to power lines in the winter?

In winter, ice and wind, even wind alone, can be just as dangerous and destructive to power lines, leading to a disruption in service. Each drop of freezing rain adds weight to power lines and their structures. It also adds more pressure and strain.